Suppliers with verified business licenses
TYWE3L is a low power consumption module with built-in Wi-Fi connectivity solution designed by HangZhou Tuya Technology Corporation. The Wi-Fi Module consists of a highly integrated wireless radio chip ESP8266 and some extra component that has been programed with Wi-Fi network protocol and plenty of software examples. TYWE3L include a 32-bit CPU, 1M byte flash, 50k SRAM and various peripheral resources.
TYWE3L is a RTOS platform, embedded with all the Wi-Fi MAC and TCP/IP protocol function examples, users can customize their Wi-Fi product by using these software examples.
Figure 1 shows the block diagram of the TYWE3L.
Figure 1. The block diagram of the TYWE3L
Integrated low power consumption 32-bit CPU, also known as application processor
Basic frequency of the CPU can support both 80MHz and 160MHz
Supply voltage range: 3V to 3.6V
Peripherals: 9 GPIO channels, 1 UART, 1 ADC
Wi-Fi connectivity:
802.11 b/g/n
Channel 1 to 14 2.4GHz
Support WPA/WPA2
+20dBm output power in 802.11b mode
Support STA/AP/STA+AP operation mode
Support SmartConfig function for both Android and IOS devices
On-board PCB antenna
Operating temperature range: -20ºC to 105ºC
TYWE3L has 2 columns of Pins. The distance between each Pin is 2mm. Size of TYWE3L: 16mm(W)*24mm(L)*3.5mm(H)
Figure 2 shows the dimensions of TYWE3L
Figure 2. The dimensions of TYWE3L
Table 1 shows the general pin attributes of TYWE3L
Table 1. The typical pin definition of TYWE3L
PIN NO. | NAME | TYPE | DISCREPTION |
---|---|---|---|
1 | RST | I/O | External reset singal(low level effects, there's already had pull-up resistor) |
2 | ADC | AI | ADC terminal(10-bits SAR ADC) |
3 | EN | I | Enable pin for module, high level effects |
4 | GPIO16 | I/O | GPIO_16(10k pull-up resistor needed) |
5 | GPIO14 | I/O | GPIO14 |
6 | GPIO12 | I/O | GPIO12 |
7 | GPIO13 | I/O | GPIO13 |
8 | VCC | P | Supply voltage (3.3V) |
9 | GND | P | Ground |
10 | GPIO15 | O | GPIO_15(processing during initials, caution when used) |
11 | GPIO2 | O | UART0_TXD(used to print module's internal information) |
12 | GPIO0 | I/O | GPIO_0(processing during initials, caution when used) |
13 | GPIO4 | I/O | GPIO4 |
14 | GPIO5 | I/O | GPIO5 |
15 | RXD0 | I/O | UART0_RXD |
16 | TXD0 | O | UART0_TXD |
Note: S: Power supply pins; I/O: Digital input or output pins; AI: Analog input. RST pin is the module hardware reset pin; it cannot eliminate module-pairing information.
(1) This pin can only be used as ADC input, cannot use it as normal I/O. when not using, just connect nothing. When used as ADC input, the input voltage range is 0~1.0V.
(2) UART0 is serial port, during power on progress; this serial port will output something, which can be ignored.
Table 2 shows the general test pin definition of TYWE3L
Table 2. The general test pin definition of TYWE3L
PIN NO. | NAME | TYPE | DESCRIPTION |
---|---|---|---|
- | TEST | I | Used for module's production test |
Note: This test pin is not recommended to use.
Table 3. Absolute Maximum Ratings
PARAMETERS | DESCRIPTION | MIN | MAX | UNIT |
---|---|---|---|---|
Ts | Storage temperature | -20 | 105 | ºC |
VCC | Supply voltage | -0.3 | 3.6 | V |
Static electricity voltage (human model) | TAMB-25ºC | - | 2 | KV |
Static electricity voltage (machine model) | TAMB-25ºC | - | 0.5 | KV |
Table 4. Electrical Conditions
PARAMETERS | DESCRIPTION | MIN | TYPICAL | MAX | UNIT |
---|---|---|---|---|---|
Ta | Working temperature | -20 | - | 105 | ºC |
VCC | Working voltage | 3 | 3.3 | 3.6 | V |
VIL | IO low level input | -0.3 | - | VCC*0.25 | V |
VIH | IO high level input | VCC*0.75 | - | VCC | V |
VOL | IO low level output | - | - | VCC*0.1 | V |
VoH | IO high level output | VCC*0.8 | - | VCC | V |
Imax | IO drive current | - | - | 12 | mA |
Table 5. Wi-Fi TX current consumption
PARAMETERS | MODE | RATE | Transmitting power | TYPICAL | UNIT |
---|---|---|---|---|---|
IRF | 11b | 11Mbps | +17dBm | 220 | mA |
IRF | 11g | 54Mbps | +15dBm | 110 | mA |
IRF | 11n | MCS7 | +13dBm | 100 | mA |
Table 6. Wi-Fi RX current consumption
PARAMETERS | MODE | RATE | TYPICAL | UNIT |
---|---|---|---|---|
IRF | 11b | 11Mbps | 76 | mA |
IRF | 11g | 54Mbps | 76 | mA |
IRF | 11n | MCS7 | 76 | mA |
Table 7. The module working current consumption
WORK MODE | AT TA=25****ºC | TYPICAL | MAX | UNIT |
---|---|---|---|---|
EZ Mode | TYWE3L is under EZ paring mode, Wi-Fi indicator light flashes quickly | 80 | 151 | mA |
AP Mode | TYWE3L is under AP paring mode, Wi-Fi indicator light flashes slowly | 90 | 451 | mA |
Operation Mode | TYWE3L is connected, Wi-Fi indicator light is on | 58.5 | 411 | mA |
Disconnection Mode | TYWE3L is disconnected, Wi-Fi indicator light is off | 80 | 430 | mA |
FAQ1.Is it possible order 1pcs? |
Suppliers with verified business licenses