ODM PCB Wireless Bluetooth WiFi Module

• Usage: Telephone, Computer, Server, Mobile phone, Laptop, Electrical Products
• Type: Wireless
• Support Network: Bluetooth
• Information content: Data
• Certification: CE, ISO, RoHS, GS
• Condition: New
• Model NO.: ST-Wifi Module
• Bluetooth Module Name: ODM PCB Wireless Bluetooth WiFi Module
• Bluetooth Module Lead Time: 5-40days
• Model: Esp8266
• Shipping: DHL, FedEx, by Sea, etc
• OEM: Yes
• MOQ: 100
• Applicable: Bluetooth Module Development
• Company Type: Manufacturer
• Transport Package: as Customer Required
• Specification: As picture
• Trademark: OEM
• Origin: China
• HS Code: 8517629900
• Production Capacity: 50000PCS Per Month

Product Description

 

Tianjin Smart Pets Technology Co. Ltd. was found in 2010. We are holding many factories and have rich production lines. Our main products can be pet kennel, pet cleaning products, cat litter, veterinary medicine, dog bark control,dog leash & collar and other plastic products and hardware products.Also we are entering into the area of smart and wifi products,We have our own researching and developing department,also our own PCBA workshop,every month we recommend new items to our old customers.
OEM/ODM are always welcomed. Quality, service and new items are our enterprise's life.

We warmly welcome every customer and cooperator to come to visit our factory and talk about cooperation.

ODM PCB Wireless Bluetooth Wifi Module Description

TYBT5 is a low power-consuming embedded Bluetooth module developed by Hangzhou Tuya Information Technology Co., Ltd. It consists of a highly integrated Bluetooth chip (TLSR8267) and a small number of peripheral circuits, with a built-in Bluetooth network communication protocol stack and robust library functions. TYBT5 also contains a low power-consuming 32-bit MCU, BLE/2.4G Radio, 512 KB flash, 16 KB SRAM, and nine reusable I/O interfaces. Figure 1.1 shows the architecture of TYBT5.

 

1.1 Features

• Built-in low power-consuming 32-bit MCU, which can also be used as an application processor Basic frequency: 48 MHz supported
• Working voltage: 1.9 V to 3.6 V
• Peripheral equipment: one I2C, five PWMs, and one UART BLE RF
• Zigbee features Compatible with BLE 4.2 RF data rate: up to 2 Mbit/s TX power: +7 dBm RX sensitivity: -92 dBm Built-in AES encryption for hardware Onboard PCB antenna Working temperature: -40°C to 105°C

1.2 Major Application Fields

• Intelligent LED
• Intelligent home
• Intelligent low power-consuming sensors

2. Module Interfaces

2.1 Dimensions and Footprint

TYBT5 provides two rows of pins with the distance of 2.0 mm between every two pins. TYBT5 size: 14.8 mm (W) × 20.4 mm (L) Figure 2.1 shows the overall pin layout of TYBT5.


 

2.2 Pin Definition

Table 2.1 describes the interface pin definition. Table 2.1 TYBT5 interface pins

No.	Symbol	I/O Type	Functions
1	PWM1	I/O	Common I/O interface, which can be used for PWM output of LED drives.
2	PWM0	I/O	Common I/O interface, which can be used for PWM output of LED drives.
3	I2C_SDA	I/O	Data line pin of I2C, which can be used as a common I/O interface.
4	I2C_SCL	I/O	Clock cable pin of I2C, which can be used as a common I/O interface.
5	3.3 V	P	Module power-supply input pin
6	PB1	I/O	Common I/O interface, which can be used for PWM output of LED drives.
7	GND	P	Module power-supply reference ground pin
0	SWS	I/O	Bluetooth chip programming pin
00	PWM4	I/O	Common I/O interface, which can be used for PWM output of LED drives.
8	RX	I/O	Serial port receiving pin, which can be used as a common I/O interface.
9	RST	I	Module reset pin
10	3.3 V	P	Module power-supply input pin
11	TX	I/O	Serial port sending pin, which can be used as a common I/O interface.
12	PWM5	I/O	Common I/O interface, which can be used for PWM output of LED drives.

Note: P indicates power-supply pins, and I/O indicates input/output pins. The SWS pin is used only for programming of module firmware. If you have special requirements for the light color controlled by PWM output, contact our business manager.

3. Electrical Characteristics

3.1 Absolute Electrical Characteristics

Table 3 .1Absolute electrical characteristics

Parameter	Description	Minimum Value	Maximum Value	Unit
Ts	Storage temperature	-20	125	°C
VCC	Power-supply voltage	-0.3	3.9	V
Static electricity voltage (human model)	TAMB -25°C	-	2	kV
Static electricity voltage (machine model)	TAMB -25°C	-	0.5	kV

3.2 Electrical Conditions

Table 3.2Normal electrical conditions

Parameter	Description	Minimum Value	Typical Value	Maximum Value	Unit
Ta	Working temperature	-20	-	105	°C
VCC	Working voltage	1.9	3.3	3.6	V
VIL	I/O low-level input	-0.3	-	VCC x 0.3	V
VIH	I/O high-level input	VCC x 0.7	-	VCC	V
VOL	I/O low-level output	VSS	-	0.3	V
VOH	I/O high-level output	VCC -0.3	-	VCC	V

3.3 Power Consumption in Operating Mode

Table 3.3 TX power consumption during constant emission

Symbol	Condition	Typical Value	Unit
ITX	Constant sending with 0 dBm output power	15	mA
IRX	Constant receiving	12	mA
IDC	Mesh connected	27	mA
Ideepsleep	Sleep mode	18	uA

4. RF Features

4.1 Basic RF Features

Table 4.1 Basic RF features

Parameter	Description
Frequency band	2.4 GHz ISM band
Radio standard	BLE 4.2
Data transmitting rate	1 Mbit/s and 2 Mbit/s
Antenna type	Onboard PCB antenna

4.2 RF Output Power

Table 4.2 TX power during constant emission

Parameter	Minimum Value	Typical Value	Maximum Value	Unit
RF average output power	3.8	7	8	dBm
20 dB occupied bandwidth (1 Mbit/s)	-	1300	-	kHz
20 dB occupied bandwidth (2 Mbit/s)	-	2600	-	kHz

4.3 RF RX Sensitivity

Table 4.3 RX sensitivity

Parameter		Minimum Value	Typical Value	Maximum Value	Unit
RX sensitivity	1 Mbit/s	-93	-92	-90	dBm
RX sensitivity	2 Mbit/s	-90	-89	-86	dBm
Frequency offset error	1 Mbit/s	-300	-	+300	kHz
Frequency offset error	2 Mbit/s	-200	-	+200	kHz
Co-channel interference suppression	-	-	-7	-	dB

5. Antenna Information

5.1 Antenna Types

The PCB antenna used by TYBT5 is an onboard PCB antenna in the 2.4 GHz Wi-Fi band.

5.2 Antenna Interference Reduction

To ensure optimal RF performance, it is recommended that the antenna on the module be at least 15 mm away from other metal parts. TYBT5 is attached to the PCB with other components using the SMT. The placement location and method of the PCB antenna directly affect the RF performance. The following figures show the recommended and non-recommended placement locations. In Figure 5.1, the antenna of TYBT5 is placed outside the PCB. It is recommended that solution 1 or solution 2 be used, in which the antenna is placed outside the PCB or in a hollow location alongside the PCB. By using these two solutions, the performance of TYBT5 is almost the same as that of the module when being tested independently. If the PCB antenna must be placed on the backplane, follow the layout in solution 3, in which the antenna is placed inside the PCB but no copper or cable wires are routed under the antenna. However, the RF performance has estimated attenuation of 1 dB to 2 dB. It is not recommended that solution 4 be used, in which the antenna is placed inside the PCB and copper and other wires are routed under the antenna, and the RF signal will be significantly attenuated. Figure 5.1 Placement of the TYBT5 antenna

 

6. Packaging Information and Production Instructions

6.1 Mechanical Dimensions and Size of the Back Pad

 

6.2 Production Instructions

The factory storage conditions are as follows: 1.The anti-moisture bag must be stored in an environment with a temperature of less than 30°C and humidity of less than 85% RH. 2.The shelf life of a dry-packaged product is six months from the date when the product is packaged and sealed. Note: 1.During the whole process of production, the operator of each station must wear an electrostatic ring. 2.During the operation, strictly protect the module from water and strains.

 

FAQ

1.Is it possible order 1pcs?
Yes. we have in stock and we can provide sample service.All big business are start from small.

2.Payment:
We prefer T/T in advance or T/T 30% deposit & 70% against the copy of document for orders over 50 thousand USD. Western Union, Paypal ,Paynoeer are also accepted for small orders.

3. Can I have other accessories added?
Yes. We have long-term cooperated factories who supply various of nice accessories.We can provide the solutions for you.

4. Are you manufacturer?
Yes, we are manufacturers and holding several facories,we also have our own trade company which have import&export right.

5. What is the MOQ?
If we have in stock, MOQ is small. If items are not in stock, the MOQ depends on the product Size,your best pet products dog products supplier in China

6. What is the sample delivery time?
It depends on the dog beds models. About in 1-5 days.
We understand pet comfort and safety is extremely important to the end consumer so our pet products have been constructed and designed with this in mind.